Clemmons HVAC Company handles heating and cooling for homeowners, landlords, property managers, and businesses across Clemmons and Forsyth County. Whether you need a same-week repair, a full system replacement, or a seasonal tune-up before the weather turns, we cover the full range of residential and commercial HVAC work. We know this area. We know these systems. Sizing matched to the home.
Call (743) 223-5935 for a quote. We're open every day from 5:30 AM to 9:00 PM.
Dealing with a furnace that won't keep up or an AC that can't cool? Repairs range from a single component to a complete system replacement. Residential customers, rental property owners, and commercial operators in Clemmons and the surrounding Piedmont Triad area call us for AC repair and service, furnace repair, heat pump work, ductwork, thermostat installation, indoor air quality improvements, and seasonal maintenance. Refrigerant, airflow and controls all checked before a verdict, so you know what you're actually dealing with before any parts are quoted.
On the commercial side, we service rooftop package units, split systems, and multi-zone commercial setups. If the building isn't comfortable, we can diagnose and repair it.
Leave the heating and cooling to us.
An AC that blows warm air, short-cycles, or won't start at all usually traces back to a handful of causes: a refrigerant issue, a failed capacitor, a dirty evaporator coil, or a condenser problem. We diagnose the system before recommending a repair path. If the unit is beyond a cost-effective fix, we'll walk you through replacement options and size the new equipment to the home. We also install and service mini-split and ductless systems for additions, garages, and spaces without existing ductwork.
A furnace that won't fire, blows cold air, or cycles on and off without reaching temperature needs a proper diagnosis before any parts are ordered. Common culprits include a failed igniter, a dirty flame sensor, a blower motor issue, or a heat exchanger problem. We cover the full repair and replacement range, from a straightforward part swap to a complete furnace installation with new ductwork connections.
Heat pumps can lose efficiency quietly. If yours is struggling to heat in winter or cool in summer, the cause is often refrigerant charge, airflow restriction, or a reversing valve fault. We check all three before drawing conclusions. Routine heat pump maintenance also extends equipment life and keeps operating costs predictable.
Leaking ducts waste conditioned air before it ever reaches the room. If some rooms are harder to heat or cool than others, or your energy bills have climbed without an obvious reason, the duct system is worth inspecting. We repair damaged sections, seal leaks, and rebalance airflow so the system delivers what it was designed to.
An old or miscalibrated thermostat can make a perfectly good HVAC system behave erratically. We install programmable and smart thermostats, handle the low-voltage wiring connections to the equipment, and make sure the new control communicates correctly with your heating and cooling system before we leave.
Whole-home air filtration, UV air purifiers, and ventilation improvements work alongside your existing HVAC system to reduce airborne particles, odors, and biological contaminants. If anyone in the home has allergies, asthma, or sensitivity to dust, an air quality upgrade is worth a conversation when you call.
Systems around here run into the same few faults, and some of them happen at the worst possible time. A furnace that goes out on a cold January night or an AC that quits during a Forsyth County heat wave is not something that can wait a week.
Call us at (743) 223-5935 and we'll get the situation scoped on the phone before anything is scheduled.
We take short-notice work and are available every day from 5:30 AM to 9:00 PM.
We keep you informed from diagnosis to final test, so you're never waiting on an update or wondering what comes next. Know the price. Know what the visit covers. Know what comes next.
We're one phone call from getting your comfort right.
Clemmons sits in the Piedmont Triad, where summers are hot and genuinely humid and winters are cold enough to demand reliable heating. That combination puts real stress on both sides of an HVAC system and creates specific service needs that don't show up the same way in every part of the country. Filters, airflow and thermostat settings explain more faults than people expect, but the climate here also drives demand for equipment choices and add-ons that are worth understanding before you schedule a call.
At some point, repair costs on an aging system stop making financial sense. A unit that's failing repeatedly, running inefficiently, or simply at the end of its service life is a candidate for replacement. When that point arrives, proper sizing matters more than most homeowners realize. An oversized system short-cycles and leaves humidity behind in summer. An undersized one runs constantly and still can't keep up on the hottest or coldest days. We size replacement equipment to the actual load of the home, accounting for square footage, insulation, window area, and duct condition. Call for a quote and we'll walk through the options.
The Piedmont Triad sits in one of the fastest-growing heat pump adoption zones in the country, and for good reason. Winters here are cold but not extreme, which puts the area squarely in the operating range where a heat pump handles both heating and cooling efficiently on a single system. For homes replacing an older furnace-and-AC pairing, a heat pump installation can simplify the equipment footprint while improving year-round efficiency. We install ducted heat pumps and ductless mini-split systems and can explain which configuration fits your home's layout and existing ductwork.
Summer humidity in Clemmons is not just a comfort issue. Sustained indoor humidity above 60 percent encourages mold growth, damages wood floors and trim, and makes a properly cooled home feel warmer than it is. A central air conditioner removes some moisture as a byproduct of cooling, but it is not designed to control humidity independently. A whole-home dehumidifier integrates with your existing HVAC system and maintains indoor humidity at a set level regardless of how often the AC runs. For homes that feel clammy even when the thermostat is satisfied, it is usually the right call.
Noticing uneven temperatures or a spike in energy bills? Both are common signs that the system needs attention before the next season, not after it. A spring AC tune-up covers the condenser coil, refrigerant charge, electrical connections, and airflow through the air handler. A fall furnace tune-up addresses the heat exchanger, ignition system, blower operation, and flue. Catching a worn part or a developing fault in September costs far less than an emergency call in February.
Seasonal maintenance scheduled around your calendar means you're not scrambling to book a tune-up when every other homeowner in Forsyth County is calling at the same time. Pick up the phone and we'll get started.
HVAC pricing depends on the job: a diagnostic visit, a single-component repair, a full system replacement, and a seasonal tune-up all land at different price points. When you call, you get the rate before anything is scheduled, and you're told what the visit covers. Ask what it includes and you'll get a straight answer.
A diagnostic visit typically involves checking refrigerant pressure, airflow through the system, and the condition of controls and electrical components. That gives the technician who comes out a full picture of what's happening before any recommendation is made. Permits handled where the job needs them, so if your replacement or installation requires one, that's part of the conversation up front.
Call (743) 223-5935 to get a quote or schedule a service call. We're available every day from 5:30 AM to 9:00 PM.
We work across Clemmons, Forsyth County, and the wider Piedmont Triad region. Nearby communities we serve regularly include Winston-Salem, Lewisville, Bermuda Run, Advance, Mocksville, Kernersville, High Point, and King. Whether the job is a single-family home, a rental property, a commercial building, or a multi-unit space, we handle HVAC work across the area on the same schedule and with the same process.
When you call, someone who knows the trade answers and scopes the problem on the phone. You get a price and a clear explanation of what the visit covers before anything is scheduled. The technician who comes out runs a full diagnosis, explains what was found, and confirms the repair or next step with you before work begins. We keep you informed through the visit so there are no gaps between what was agreed on the call and what happens at the property.
We are available every day from 5:30 AM to 9:00 PM, including Saturdays and Sundays. Weekend calls are handled the same way as weekday calls: the job gets scoped on the phone and a price is confirmed before anything is scheduled.
If you are dealing with a heating or cooling problem over the weekend, call (743) 223-5935 and we will take care of it.
Lead times depend on the current schedule and the nature of the job. When you call, we can tell you what the schedule allows and confirm availability before you commit to anything. For urgent situations like no heat or no cooling, we take short-notice work and handle those calls as a priority within our daily hours of 5:30 AM to 9:00 PM.
Yes. We confirm what the visit covers on the initial call, and a call goes out before anyone arrives at the property. That gives you time to make sure the property is accessible and that someone is available to walk through the findings at the end of the visit. If anything about the timing changes, we let you know.
The price covers what was agreed on the call, including the diagnostic work and whatever repair or service scope was confirmed before scheduling. If additional faults are found during the visit that were not apparent on the phone, we explain what they are and what addressing them would involve before any additional work is done. You are not charged for work that was not discussed and agreed upon first.
The scope of the work is the main cost driver. A diagnostic call, a single-component repair, a full system replacement, and a seasonal tune-up all land at different price points, and the cost of parts varies by equipment type and age. If the diagnosis reveals a fault that is more involved than what the initial symptoms suggested, we explain the full picture before any additional work is quoted. Permits are handled where the job needs them, and that is part of the conversation up front rather than a surprise at the end.
System size and home size both affect the cost of installation and replacement work, because larger spaces require more capacity and sometimes more materials. For repair calls and tune-ups, the main cost factors are the nature of the fault and the parts involved rather than square footage. When you call for a quote, we ask the right questions to give you an accurate number before anything is scheduled.
The best approach is to make sure the technician who comes out can access the equipment, including the air handler, outdoor unit, and any accessible ductwork or thermostat. If a key, gate code, or building access is needed, let us know on the call so we can confirm the details before the visit. We will still walk through the findings with you, either by phone at the end of the visit or in person if you are able to be there.
A diagnostic and repair call for a single fault usually runs one to three hours, depending on what the system needs and whether parts are involved. A full system replacement takes longer and can span the better part of a day depending on the equipment and the installation scope. We give you a realistic time estimate on the call so you can plan around it.
We work with landlords, property managers, and multi-unit property owners across Forsyth County and the surrounding area. The process is the same as for a residential homeowner: the job gets scoped on the call, a price is confirmed before the visit, and the technician who comes out explains what was found and what was done.
If you manage multiple properties and need a consistent contact for HVAC work, call (743) 223-5935 and we can discuss how to handle your account.
We handle both residential and commercial heating and cooling work across Clemmons and Forsyth County. Commercial jobs often involve rooftop package units, multi-zone systems, or larger split systems, and they sometimes require phased scheduling around business hours. The diagnostic and quoting process works the same way regardless of the property type: scope on the call, price confirmed before the visit, and a clear explanation of findings at the end.
It helps to know the type of system you have (central AC, heat pump, furnace, mini-split), the age of the equipment if you know it, and a description of what the system is doing or not doing. If you have noticed the problem in a specific part of the home or at a particular time of day, that detail is useful too. The more context you can give on the call, the more accurately we can scope the job and give you a useful price.
Clemmons HVAC Company is available every day from 5:30 AM to 9:00 PM for repairs, installations, replacements, and seasonal maintenance. System tuned. Airflow balanced. Home comfortable.
Call (743) 223-5935 to get started.
From a furnace that will not light to an AC that runs all day without cooling the house, the work we handle covers the full range of heating and cooling needs for Clemmons homes and Forsyth County businesses. The table below lays out each service, what it covers, and who it fits best. Call for a quote and we will scope the job on the phone before anything is scheduled.
| System Service | What's Included | When You Need It | Helpful Details |
|---|---|---|---|
| Heating & Furnace Repair | Ignition and heat exchanger check, Blower and airflow diagnosis, Boiler and hydronic system repair | Any property that has lost heat or is getting uneven warmth | Short cycling is often a safety response to an ignition or airflow fault, not a thermostat problem. |
| Emergency HVAC Service | No-heat and no-cool calls, System-down diagnosis, Short-notice scheduling | Situations where the system has failed entirely and waiting is not an option | We take emergency calls every day from 5:30 AM to 9:00 PM. The fault gets scoped on the phone before the visit. |
| Indoor Air Quality & Air Filtration | Filtration system installation, Purifier connection to existing equipment, Humidity and air quality assessment | Households dealing with allergy season, excess dust, or elevated indoor humidity | During Forsyth County allergy season, upgrading filtration is one of the more straightforward comfort improvements available. |
| Thermostat & Smart-Control Installation | Smart thermostat installation, Low-voltage wiring connection, Zoning and schedule setup | Homeowners who want better control over comfort and energy use without replacing the whole system | A thermostat that misreads the space costs money on every cycle. Upgrading the control is often a fast fix. |
| Heat Pump Installation | Ducted and ductless mini-split options, Low-voltage control wiring, Outdoor and indoor unit placement | Forsyth County homes looking for one system to handle both heating and cooling efficiently | North Carolina winters are mild enough that a heat pump handles most heating loads without constant backup heat. |
| Seasonal Maintenance & Tune-Ups | Full system inspection, Refrigerant, airflow and controls checked, Filter and coil condition assessed | Any property that wants to catch small faults before they become repair calls | Maintenance scheduled before peak heating or cooling demand catches problems when the stakes are lower. |
| Full System Installation & Replacement | Load calculation and proper sizing, Full equipment installation, Permits handled where required, System test before job close | Homes or buildings where repair no longer makes financial sense or the equipment has reached its limit | Matching the old unit's capacity is not always right. We size to the actual load of the space. |
| Ductwork Repair & Sealing | Duct leak inspection, Sealing and rebalancing, Airflow verification after repair | Homes with uneven temperatures or unexplained spikes in energy bills | Air escaping into an unconditioned attic or crawl space never reaches the rooms it was meant to serve. |
| Heat Pump Repair & Service | Reversing valve inspection, Refrigerant circuit check, Defrost cycle diagnosis | Forsyth County homes running a heat pump year-round for both heating and cooling | A stuck reversing valve can leave the system heating when it should cool, or the reverse. It is a common fault here. |
| Whole-Home Dehumidification & Humidity Control | Dehumidifier connected to air handler, Humidity level set and calibrated, Moisture diagnosis during inspection | Clemmons homes that feel damp or clammy even when the AC is keeping up with temperature | A central AC removes some moisture as a side effect of cooling but is not designed to control humidity on its own. |
| AC Repair & Service | Refrigerant circuit diagnosis, Condenser and compressor inspection, Airflow and coil check | Homes or businesses with an AC running but not cooling | A refrigerant leak shows up gradually, not all at once. Finding the leak comes before any refrigerant work. |
Every job is different, and the best way to get a straight answer about your system is to call us directly. We will scope the work on the phone and give you a price before anything is scheduled. Call (743) 223-5935 any day from 5:30 AM to 9:00 PM.
(743) 223-5935