When a property manager in Lewisville has a tenant calling about no heat, or a landlord is turning over a unit and needs the system inspected before the next lease starts, that call comes to us. We handle the full range of heating and cooling work across Lewisville and the surrounding area, from a single-component repair to a complete system replacement. Whether the property is occupied or between tenants, we scope the job on the phone and schedule around what the situation actually requires.
Call (743) 223-5935 to get started. We take calls every day from 5:30 AM to 9:00 PM.
Builders and contractors working on residential projects in Lewisville also call us when a new installation needs to be done right before a certificate of occupancy is on the table. We handle the equipment side of those jobs: the furnace, the air handler, the outdoor unit, the ductwork, and the controls that tie it all together. Permits are handled where the job needs them, and that conversation happens before the work is scheduled, not after. One call is enough to confirm whether we can take the job and what the process looks like.
Getting a quote starts on the phone, and the more you can tell us about the equipment and the situation, the more useful the call will be. If you know the type of system, whether it is a furnace and central AC, a heat pump, or a ductless mini-split, that helps us scope the job before anyone comes out. The age of the equipment matters too, and a rough idea of what the system is doing or not doing gives us a starting point.
We will ask about the symptoms: whether the system is running but not reaching the set temperature, whether it is cycling on and off more than usual, whether certain rooms are noticeably warmer or cooler than others, or whether it has stopped working entirely. For commercial or rental properties, we will ask whether the space is occupied and what access looks like. The job gets scoped on the call rather than on the driveway, so by the time we confirm the visit you already know what it covers and what it costs.
A furnace that starts and then shuts off before the space reaches temperature is usually responding to a fault in the ignition system, the heat exchanger, or the airflow path. A boiler or hydronic radiant system that loses pressure or stops circulating heat properly has its own set of causes, and we work through those on the heating side of the job. We handle repair and full replacement for both, and when replacement is the right call, the new equipment is sized to the actual load of the space rather than matched to the footprint of what came out.
Heat pump adoption across the Carolinas is among the highest in the country, and for good reason. A properly installed heat pump handles both heating and cooling on one system, and the region's winters fall within the range where it operates efficiently without constant backup heat. If a heat pump is struggling to heat in cold weather or failing to cool in summer, the fault often sits in the refrigerant circuit, the reversing valve, or the defrost cycle. We diagnose each of those before drawing a conclusion. For properties replacing an older furnace-and-AC pairing, a heat pump installation is worth a conversation when you call.
A central air conditioner removes some moisture as a byproduct of cooling, but it is not designed to hold indoor humidity at a stable level. When summer humidity in the region pushes indoor moisture high enough that a properly cooled home still feels damp, a whole-home dehumidifier connected to the air handler is the right solution. It maintains humidity at a set level regardless of how often the AC cycles, and it takes the load off the cooling system in the process.
A thermostat that is reading the space incorrectly, or that cannot hold a programmed schedule, costs money on every cycle without any visible fault in the equipment itself. We install programmable and smart thermostats and handle the low-voltage wiring that connects the control to the heating and cooling equipment. Zoning systems that let different areas of a building run on independent schedules are also available where the duct layout supports them.
Dry indoor air in winter is a comfort problem and a structural one. Wood floors, trim, and cabinetry respond to sustained low humidity, and a whole-home humidifier connected to the furnace or air handler brings moisture back into the supply air before it reaches the living space. We install and service humidifiers as part of the same HVAC work, not as a separate trade.
A system that is producing conditioned air but not delivering it evenly often has a duct or register problem rather than an equipment fault. Registers that were never balanced for the current layout, dampers that have shifted, or duct sections that have come loose all reduce airflow to specific areas without triggering any fault code on the equipment. We check the full delivery path, not just the unit, before recommending a fix.
A system that runs for long stretches without reaching the thermostat target is usually dealing with one of three things: a refrigerant issue, an airflow restriction, or equipment that was never sized correctly for the space. Refrigerant, airflow and controls all checked before a verdict, so the repair addresses what is actually happening rather than what is easiest to reach.
Uneven temperatures across a property are one of the most common calls we get, and the cause is almost never what the customer expects. The instinct is to blame the equipment, but a furnace or AC that is working correctly can still leave a room cold or stuffy if the duct system is not delivering air where it needs to go.
Leaky duct sections, undersized branch runs, blocked or partially closed registers, and return air that is not drawing from the right locations all produce the same result: one part of the property is comfortable and another is not. The fix depends on where the restriction or leak sits. Sometimes it is a single duct connection that has come loose. Sometimes the whole distribution system needs to be rebalanced. We work through the delivery path from the air handler to the register before settling on a cause.
Seasonal maintenance scheduled around your calendar is the best way to catch those problems before they become comfort complaints. A tune-up that includes an airflow check across the system identifies developing restrictions before they affect the occupied space.
Availability for Lewisville calls is the same as for the rest of the area we cover: every day from 5:30 AM to 9:00 PM. For urgent situations, no heat and no cooling in particular, we take short-notice calls and handle those as a priority within those hours. We keep you informed from diagnosis to final test, so there are no gaps between what was agreed on the call and what the technician who comes out actually does.
For occupied rental properties or commercial spaces that need to stay open, we work around the schedule the property requires. That conversation happens when you call, not when the technician arrives. If a tenant needs to be present, or if access has to be coordinated with a building manager, we confirm those details before the visit is booked.
For emergency situations, turn the system off at the thermostat if it is making a burning smell or running in a way that seems unsafe, and call us. Describe what the system was doing before it stopped so we can scope the fault on the phone. A fast response is available within our daily hours, and we confirm what is available when you call.
The price is confirmed before the visit is scheduled, not at the end of it. When you call for a quote, we ask about the system, the symptoms, and what the job is likely to involve, and we give you a rate based on that. Ask what it covers and you get a straight answer.
What moves a quote is the nature of the fault, how much of the system needs to be accessed to address it, and whether repair or replacement is the better answer. A diagnostic call on a single component lands at a different price from a full system replacement. If the technician who comes out finds something that was not apparent on the phone, that is explained and priced before any additional work is done. You are not charged for work that was not discussed first.
Permits are part of the conversation up front where the job requires them. The work is done to the standard that code inspectors in this area enforce, and that is confirmed before the installation or replacement is scheduled.
A system's rated efficiency is what it achieves under test conditions. What a property actually sees depends on duct condition, refrigerant charge, filter maintenance, and whether the equipment was sized correctly for the space in the first place. A high-efficiency unit installed in a duct system with significant leakage will not deliver the savings the rating suggests.
We check the full system, not just the unit, before drawing conclusions about efficiency. If the duct system is losing conditioned air before it reaches the living space, or if the equipment is working against a refrigerant charge that has drifted, addressing those issues often improves performance more than replacing the unit would. Where replacement is the right answer, we size the new equipment to the actual load so the efficiency rating reflects what the property will actually experience.
We serve Lewisville and the surrounding communities across Forsyth County. Neighboring towns and areas we cover regularly include Clemmons, Bermuda Run, Bethania, East Bend, and Tobaccoville. Residential properties, rental units, commercial buildings, and multi-unit spaces across the county are all within the area we work.
Whether the job is a repair call on a system that stopped working overnight, a full replacement that has been on the schedule for a season, or a new installation on a property under construction, the process is the same across all of them: the job gets scoped on the call, the price is confirmed before the visit, and the work is explained before it starts. If none of that quite fits, our full list of heating and cooling services covers the wider range.
A heat pump installation can replace a separate furnace and central AC with a single system that handles both heating and cooling. For homes in this region, where winters are cold but not extreme, a heat pump handles most heating loads efficiently without relying heavily on backup heat. We size the replacement to the actual load of the home and handle the full installation including the air handler, outdoor unit, and control wiring.
Call (743) 223-5935 and we will walk through whether a heat pump is the right fit for your property.
We work with landlords and property managers across Lewisville and Forsyth County on repair calls, seasonal maintenance, and full system replacements. For occupied units, we coordinate access and scheduling on the call so the visit works around the tenant rather than disrupting them. The diagnostic and pricing process is the same as for any other property: scope on the call, price confirmed before the visit, findings explained before work begins.
A system that runs without satisfying the thermostat is usually dealing with a refrigerant issue, a coil problem, a duct leak that is losing conditioned air before it reaches the space, or a system that is undersized for the load. In humid climates, excess indoor humidity can also make a properly functioning system feel inadequate. A diagnostic visit checks all of those factors rather than defaulting to a refrigerant recharge.
We can assess what has been done and what remains, and take it from there if the work to that point is sound.
Call (743) 223-5935 and describe the situation, including what equipment is involved and how far the installation got.
We will let you know what the visit would cover and what it would take to complete the job properly.
It helps. The technician who comes out needs to reach the air handler, the filter, and any accessible ductwork connections. If the equipment is in a utility closet, attic, or crawl space that is currently blocked, clearing a path before the visit saves time. Let us know on the call if access is difficult and we can discuss what is needed.
We check the filter as part of every maintenance visit. If the filter is due for replacement, we let you know. Whether we replace it on the spot depends on the type of filter your system uses and whether the right replacement is available. Standard disposable filters are typically straightforward to replace during the visit. Specialty media filters may need to be ordered if the right size is not on hand.
We let you know what we found before the visit ends. If the additional issue is something that can be addressed in the same visit, we explain what it involves and get your agreement before doing any work beyond the original scope. If it requires a separate visit or parts that are not on hand, we explain that and help you get it scheduled.
When you call (743) 223-5935, someone who knows the trade answers and asks the right questions about your equipment and your situation.
By the end of the call, you know the price, you know what the visit covers, and you have a scheduled appointment. We take calls every day from 5:30 AM to 9:00 PM. Call now and we will work it out on the phone.
Just as close, we take heating and cooling work in: Bermuda Run, King, Midway, Walkertown. Browse our map of towns.
From a furnace that will not light to an AC that runs all day without cooling the house, the work we handle covers the full range of heating and cooling needs for Lewisville homes and Forsyth County businesses. The table below lays out each service, what it covers, and who it fits best. Call for a quote and we will scope the job on the phone before anything is scheduled.
| System Service | What's Included | When You Need It | Helpful Details |
|---|---|---|---|
| Thermostat & Smart-Control Installation | Smart thermostat installation, Low-voltage wiring connection, Zoning and schedule setup | Homeowners who want better control over comfort and energy use without replacing the whole system | A thermostat that misreads the space costs money on every cycle. Upgrading the control is often a fast fix. |
| Full System Installation & Replacement | Load calculation and proper sizing, Full equipment installation, Permits handled where required, System test before job close | Homes or buildings where repair no longer makes financial sense or the equipment has reached its limit | Matching the old unit's capacity is not always right. We size to the actual load of the space. |
| Ductwork Repair & Sealing | Duct leak inspection, Sealing and rebalancing, Airflow verification after repair | Homes with uneven temperatures or unexplained spikes in energy bills | Air escaping into an unconditioned attic or crawl space never reaches the rooms it was meant to serve. |
Every job is different, and the best way to get a straight answer about your system is to call us directly. We will scope the work on the phone and give you a price before anything is scheduled. Call (743) 223-5935 any day from 5:30 AM to 9:00 PM.
(743) 223-5935