Clemmons HVAC Company handles residential and commercial heating and cooling work across Clemmons and the wider Forsyth County area. That covers repair, service, installation, replacement, and seasonal maintenance, everything from a furnace that stopped working overnight to a full AC system replacement on a commercial property. We know this area. We know these systems. Sizing matched to the home.
Whether you are dealing with a cooling system that cannot keep up in July or a furnace that quit on a cold January night, the work gets scoped on the call before anything is scheduled. Pick up the phone and we'll get started.
Dealing with a furnace that won't keep up or an AC that can't cool? The full range of residential and commercial HVAC work is covered here, from a single repair call to a complete system replacement. Forsyth County sits in the Piedmont Triad, where summers run hot and humid and winters bring genuine cold. That climate puts real demand on both cooling and heating equipment, and it is why the full-service scope matters. A system that handles a 95-degree August afternoon and a 25-degree February night needs to be right on both ends.
Refrigerant, airflow and controls all checked before a verdict. That is how a diagnosis goes: a thorough look at what the system is actually doing before any repair or replacement is recommended.
An AC service call covers a system that is not cooling, blowing warm air, short-cycling, or running constantly without reaching the set temperature. Central air systems, ductless mini-splits, and air handlers all fall within scope. The technician who comes out checks refrigerant levels, airflow, electrical connections to the unit, and control signals before settling on a diagnosis.
When a system is beyond repair or simply too old to run efficiently, a full replacement gets sized to the home or building, not just swapped for the same unit. Call for a quote and you will get a price before anything is booked.
Common furnace faults include a unit that will not turn on, one that runs but cannot hold temperature, unusual noises during a cycle, or a burning smell on startup. A service call covers diagnosis of the fault, a clear explanation of what the repair involves, and a price before work starts.
Not every furnace fault calls for a replacement. A cracked heat exchanger or a failed control board on an older unit is a different conversation than a worn igniter on a system that is otherwise sound. Seasonal tune-ups keep furnaces running cleanly through the heating months, and scheduling one before the cold sets in is straightforward. Boiler and hydronic heating systems are also in scope for repair and service.
Heat pumps handle both heating and cooling, which makes them a practical fit for Forsyth County's mixed climate. A system that is not heating in winter, not cooling in summer, or short-cycling through either season needs a proper diagnosis before a repair or replacement decision is made.
Mini-split and ductless heat pump systems are included. The repair-versus-replace question depends on the age of the unit, the nature of the fault, and what a replacement would involve for the property. That conversation happens on the call, with a price confirmed before any visit is scheduled.
Noticing uneven temperatures or a spike in energy bills? The equipment itself is only part of the picture. Ductwork, thermostats, and indoor air quality systems determine whether a well-functioning unit actually delivers consistent comfort throughout the home or building. Permits handled where the job needs them, so the work is done right from the start.
Leaking or unbalanced ducts are a common root cause of rooms that will not reach temperature and energy bills that do not match how much the system is running. A duct inspection looks at where air is escaping, where flow is restricted, and whether the layout is delivering air where it needs to go.
Sealing and rebalancing often resolves the problem without major work. When ductwork is too deteriorated or poorly designed to patch effectively, a full replacement gives a better long-term result. The visit covers a diagnosis and a clear explanation of what the options involve.
A thermostat that is not reading correctly, not communicating with the system, or simply outdated can undercut an otherwise functional HVAC setup. Installation covers wiring checks, calibration, and a full system test to confirm the new control is talking to the equipment properly.
Smart thermostats and programmable models are both in scope. Zoning systems, which let different areas of a home or building run on separate schedules, are also handled. The visit covers everything from the wiring to the final test before the technician leaves.
Whole-home air filtration, UV air purifiers, air scrubbers, and ventilation upgrades address problems that standard HVAC maintenance does not. Allergy symptoms that worsen indoors, musty odors that return after cleaning, or visible dust settling quickly after a vacuum are all signs that the air handling side of the system may need attention.
An IAQ assessment looks at what the existing system is and is not filtering, where contaminants are entering the airstream, and what an installation would involve for the specific property. The scope and the price are settled before anything is scheduled.
Systems around here run into the same few faults, and the work covers both residential and commercial properties across the county. Homeowners, landlords, property managers, and small commercial clients all have different scheduling needs and different equipment scales, and the approach adjusts accordingly.
Commercial jobs often involve larger equipment, phased scheduling around business hours, and permit requirements that differ from a standard residential installation. We keep you informed from diagnosis to final test, so there are no gaps between what was agreed on the call and what happens on the day.
Scheduling gets settled on the same call. The scope, the price, and what the visit covers are all confirmed before anything is booked, so there is nothing to work out later. We're one phone call from getting your comfort right.
What makes this service different is straightforward: the Piedmont Triad climate shapes what goes wrong and when. Clemmons summers are long, humid, and consistently hot, which puts sustained load on cooling equipment. Refrigerant loss, coil fouling, and airflow restrictions show up more in systems that have been running hard through a stretch of 90-degree days than in systems that only cool for a few weeks a year.
Winters in Forsyth County are cold enough to push heating equipment to its limits. Heat pumps lose efficiency as outdoor temperatures drop, and a system that was marginal in November may not hold temperature in January. Furnace faults that were quiet through the summer often surface on the first cold night of the season.
Sizing matters more than most homeowners realize. An oversized AC unit short-cycles, which means it cools the air quickly but does not run long enough to pull humidity out, leaving a home that feels cool but clammy. An undersized unit runs constantly and still cannot reach the set temperature on the hottest days. Both problems are common here, and both are avoidable when equipment is matched to the actual load of the home rather than to a rough square-footage estimate.
A system down in the middle of a Clemmons summer or a cold Forsyth County winter is not a situation that waits. No heat overnight, no cooling during a heat stretch, or a system that has stopped responding entirely are all handled as urgent calls.
Emergency service covers a furnace that stopped working, an AC that quit during a run of high temperatures, and any system failure that leaves a home or commercial property without climate control. When you call, someone who knows the trade answers, scopes the problem on the phone, and confirms what the visit covers before anything is scheduled.
We are available every day from 5:30 AM to 9:00 PM. Leave the heating and cooling to us.
What makes this service different is straightforward: costs vary by job type, equipment age, and scope, and the call is where the number gets settled. A thermostat swap involves different labor and materials than a full system replacement, and a tune-up call looks nothing like a duct sealing job. The price is confirmed before anything is scheduled, so you know what the visit covers before it starts.
The main cost categories are roughly these:
Seasonal maintenance scheduled around your calendar means the tune-up happens before the season puts the system under load, not after a problem surfaces.
Know the price. Know what the visit covers. Know what comes next.
Clemmons is the primary service area, and Forsyth County is the wider region we cover for both residential and commercial HVAC work. The surrounding communities are also in scope, including:
Whether the property is a single-family home in Clemmons, a rental unit in Lewisville, or a commercial building in Winston-Salem, the same scope of work applies. Repair, installation, replacement, maintenance, and emergency service are all available across the area.
We cover Clemmons and the wider Forsyth County area, including Winston-Salem, Lewisville, Bermuda Run, Advance, Mocksville, High Point, Kernersville, and King. Both residential and commercial properties are in scope across the region.
If you are not sure whether your address falls within the service area, call (743) 223-5935 and we can confirm it on the call.
It means the call is answered by someone who knows the trade and knows the Forsyth County area, not a general intake line. The job gets scoped on the phone with enough detail to give you an accurate price before anything is scheduled. The work is done locally, and you are kept informed from diagnosis through the final system test so there are no gaps between what was agreed and what was done.
When you call, the scope, price, and what the visit covers are all confirmed before anything is scheduled. If you need to be reminded of the visit details or if anything changes on the schedule, we communicate that before the technician who comes out is on the way. The goal is that you know exactly what is happening and when, without having to follow up.
If a fault returns after a repair, call us and describe what the system is doing. We will scope the situation on the phone to determine whether the original fault has recurred or whether a separate issue has developed. The diagnostic process starts fresh with what the system is doing now, not with an assumption that the prior repair was the cause.
A completed job means the system has been tested through a full cycle, the fault that brought us out has been confirmed resolved, and the work area is left in the same condition it was found in. We walk through the findings with you before leaving so you understand what was done and what, if anything, to watch for. If a follow-up is needed, that is explained before the technician leaves.
If a repair requires a part that is not immediately available, we explain that on the call or at the visit and confirm what the next step involves. In the meantime, we can advise on whether the system can continue running safely or whether it needs to be shut down. We keep you informed at every step rather than leaving you waiting on an update.
A symptom like short-cycling or loss of cooling can trace back to several different root causes depending on the equipment type, age, and condition of the system. A refrigerant issue, an airflow restriction, a failing capacitor, and a control-board fault can all produce similar symptoms but require different repairs. That is why refrigerant, airflow, and controls are all checked before a verdict is reached, rather than assuming the most common cause is the right one.
Clemmons HVAC Company covers the full scope of residential and commercial heating and cooling work: repair, installation, replacement, seasonal maintenance, and emergency service across Clemmons and Forsyth County.
System tuned. Airflow balanced. Home comfortable.
Call (743) 223-5935 to get a quote.
We're available every day from 5:30 AM to 9:00 PM. Pick up the phone and we'll get started.
(743) 223-5935