When a furnace stops producing heat or an AC runs all afternoon without cooling the house down, waiting a week is not an option. We cover Midway and the surrounding Davidson County area for the full range of heating and cooling work: repair, replacement, seasonal maintenance, and the kind of diagnostic call that tells you whether a repair makes sense or whether the equipment has reached the end of its useful life.
Call (743) 223-5935 and the job gets scoped on the call rather than on the driveway.
You get a price and a clear picture of what the visit covers before anything is scheduled.
Midway is a town where a lot of the housing stock has been running on the same equipment for a long time, and where additions, finished basements, and rooms that were never quite reached by the original ductwork are common. That shapes the work we see here. Homes that have never had a proper airflow balance, systems that are a repair away from a replacement decision, and equipment that has run quietly for years without a tune-up are all situations we handle.
Reach us through Clemmons HVAC Company at (743) 223-5935, available every day from 5:30 AM to 9:00 PM.
Uneven temperatures across a home are one of the most common complaints we hear, and the cause is almost never the thermostat itself. A room that runs ten degrees warmer than the rest of the house in summer, or that stays cold no matter how high the heat is set, usually points to something in the ductwork, the airflow path, or the way the system was sized relative to the space it is trying to condition.
Ducts that have developed leaks over years of use allow conditioned air to escape into attics and crawl spaces before it reaches the room it was meant to serve. The system keeps running to compensate, energy bills climb, and the room at the end of the run stays uncomfortable. We inspect, seal, and repair duct systems so the air the equipment produces actually arrives where it is needed.
An addition that was tied into an existing duct system without accounting for the added load is a reliable source of comfort complaints. The original equipment was sized for the original footprint, and the new space simply does not get enough airflow to keep up. Zoning and comfort-control upgrades can address this without requiring a full system replacement, depending on the layout and what the existing equipment can support.
We take short-notice calls every day from 5:30 AM to 9:00 PM.
If a system has gone down entirely, call (743) 223-5935 and we will scope the situation on the phone before the visit so the technician who comes out knows what to expect.
A no-heat call in the middle of a cold stretch and a no-cooling call during a summer heat wave are both situations we treat as urgent rather than routine.
For rental properties and commercial spaces where a tenant or a business has to stay open, we work around the schedule as much as the job allows. The diagnostic process does not change, but we factor in access, occupancy, and what can realistically be done while the space is in use. We keep you informed from diagnosis to final test, so there are no gaps between what was agreed on the call and what happens at the property.
A system's rated efficiency is measured under controlled conditions, not in a Midway home with a partially blocked return, a duct system that has developed leaks over the years, and a filter that has not been changed since last spring. The gap between what a unit is rated to do and what it actually delivers on a given property is real, and it is almost always explained by installation quality, duct condition, and maintenance history rather than by the equipment itself.
Refrigerant charge that has drifted, coils that have accumulated fouling, and blower motors that are working harder than they should all reduce what a system delivers without triggering a fault code or a warning light. A system can lose meaningful capacity over years of operation without a single dramatic failure. A seasonal tune-up addresses these before they compound into a repair call. Heating checked. Cooling checked. Airflow measured.
If a system is old enough that it uses a refrigerant type being phased out, or if repair costs are approaching a point where replacement starts to make financial sense, upgrading to a more efficient unit can reduce operating costs over time. The honest answer on whether that math works for a specific property comes from a proper assessment of the existing system, not from a general claim about efficiency ratings. We give you that assessment on the call.
A furnace that starts and shuts off quickly, that runs but blows cold air, or that will not fire at all is showing one of a handful of common fault patterns: an ignition problem, a flame sensor that needs cleaning, a heat exchanger issue, or an airflow restriction that triggers a safety shutoff. We diagnose before recommending a repair, because the symptom and the cause are not always the same thing.
The humid summers across this region mean that a central air conditioner is often working harder than it should to manage moisture it was not designed to control independently. A whole-home dehumidifier connects to the air handler and maintains indoor humidity at a set level regardless of how often the AC cycles. In winter, a whole-home humidifier prevents the dry air that comes with forced-air heating and makes a properly heated home feel warmer at a lower thermostat setting.
Homes that have relied on window units or that have never had central cooling are candidates for a central air installation. The process involves sizing the equipment to the actual load of the home, connecting it to the existing or new duct system, and running the low-voltage control wiring to the thermostat. Where ductwork does not exist or cannot practically be extended, a ductless mini-split system is an alternative that handles cooling and heating in specific zones without requiring a full duct run.
A system that runs all day without reaching the thermostat target is not necessarily a failing system. It may be undersized for the space, working against duct leakage that is bleeding off conditioned air, or dealing with a refrigerant charge issue that reduces its ability to transfer heat effectively. Refrigerant, airflow and controls all checked before a verdict, so the repair addresses the actual problem rather than the most obvious one.
The air handler and blower motor are the mechanical heart of a forced-air system. A motor that is drawing more current than it should, a blower wheel that has accumulated debris, or an air handler that is pulling in unconditioned air through a gap in the cabinet all affect what the system delivers to the living space. These components are inspected as part of a full diagnostic visit and serviced when the condition warrants it.
Pricing depends on the job. A diagnostic visit, a single-component repair, a seasonal tune-up, and a full system replacement all land at different price points, and within each of those the specifics move the number. What the fault turns out to be, which components need to be reached, whether the repair is straightforward or requires additional access work, and whether a repair or a replacement is the better answer all affect what the visit costs.
When you call, you get the rate before anything is scheduled. The price covers what was agreed on the call. If the diagnosis turns up a fault that was not apparent from the initial symptoms, we explain what it is and what addressing it would involve before any additional work is quoted. Permits are handled where the job needs them, and that is part of the conversation up front. Ask what the visit covers and you get a straight answer. Pick up the phone and we'll get started.
We serve Midway and the surrounding Davidson County area, and we cover the neighboring communities as part of the same service area. That includes Wallburg, Welcome, Thomasville, Advance, and Winston-Salem. Whether the property is a single-family home, a rental unit, or a commercial building, the process is the same: the job gets scoped on the call, a price is confirmed before the visit, and the technician who comes out explains what was found and what was done before leaving. A quick read of the HVAC services page covers the rest.
If you are not sure whether your address falls within our coverage area, call (743) 223-5935 and we will confirm it on the call.
The pattern of the problem usually points in one direction. If certain rooms are consistently harder to heat or cool than others while the rest of the house is comfortable, the duct system is often the place to start. If the whole house is struggling and the system is running longer than it should, the equipment itself is more likely to be the issue. A diagnostic visit checks both, so the repair targets the actual cause rather than the more convenient one.
Yes. Every visit ends with the system running through a full cycle so we can confirm the repair or installation is holding before anyone leaves. That includes checking that the thermostat is communicating correctly with the equipment and that airflow and temperature at the registers are where they should be. We do not consider the job complete until the system has been run up and checked.
The region's winters are cold enough to need reliable heating but mild enough that a heat pump handles most heating loads efficiently without running backup heat constantly. Homes replacing an aging furnace-and-AC pairing are often good candidates, because a heat pump covers both functions on a single system. Whether a ducted heat pump or a ductless mini-split is the right fit depends on the home's layout and existing ductwork, and we walk through that on the call.
Weak airflow at the registers while the system is running usually points at a dirty air filter, a blocked or collapsed duct section, a blower motor issue, or a coil that has become fouled and is restricting airflow through the air handler. Each of those causes produces the same symptom but requires a different fix. A filter check is a reasonable first step, and if that does not resolve it, a diagnostic visit is the right call.
Coverage decisions are based on where we can reliably get to and serve well.
If you are in an area not currently listed and want to know whether we can help, call (743) 223-5935 and describe the location.
We will give you a straight answer about whether it falls within what we cover.
Sometimes. We inspect the duct system as part of the replacement process to check for leaks, restrictions, and whether the existing layout can handle the airflow the new equipment requires. If the ducts are in good condition and properly sized, reusing them makes sense. If they are leaking significantly or undersized for the new unit, we explain what needs to change before the installation is scheduled.
We handle HVAC work for rental properties across Midway, Davidson County, and the surrounding communities including Wallburg, Welcome, and Thomasville. The process is the same as for an owner-occupied home: the job is scoped on the call, a price is confirmed before the visit, and findings are explained before the technician leaves.
If you manage more than one property in the area, call (743) 223-5935 and we can discuss how to handle your account.
Yes.
If you own multiple properties and want them all maintained on a regular schedule, call (743) 223-5935 and describe the portfolio.
We can discuss how to structure the visits so the work gets done before each heating and cooling season without requiring a separate call for each property.
The question of whether to repair or replace is one of the most common ones we hear, and the honest answer depends on the specific system, its age, and what the fault actually is.
Call (743) 223-5935 and we will give you a straight answer based on a real diagnosis, not a guess from a description.
We are available every day from 5:30 AM to 9:00 PM. We handle the full range of heating and cooling work across Midway and Davidson County.
HVAC service covers these nearby towns as well: Wallburg, Welcome, Thomasville, Bermuda Run, Kernersville. View our map of towns.
From a furnace that will not light to an AC that runs all day without cooling the house, the work we handle covers the full range of heating and cooling needs for Midway homes and Davidson County businesses. The table below lays out each service, what it covers, and who it fits best. Call for a quote and we will scope the job on the phone before anything is scheduled.
| System Service | What's Included | When You Need It | Helpful Details |
|---|---|---|---|
| Emergency HVAC Service | No-heat and no-cool calls, System-down diagnosis, Short-notice scheduling | Situations where the system has failed entirely and waiting is not an option | We take emergency calls every day from 5:30 AM to 9:00 PM. The fault gets scoped on the phone before the visit. |
| Full System Installation & Replacement | Load calculation and proper sizing, Full equipment installation, Permits handled where required, System test before job close | Homes or buildings where repair no longer makes financial sense or the equipment has reached its limit | Matching the old unit's capacity is not always right. We size to the actual load of the space. |
| Heat Pump Repair & Service | Reversing valve inspection, Refrigerant circuit check, Defrost cycle diagnosis | Davidson County homes running a heat pump year-round for both heating and cooling | A stuck reversing valve can leave the system heating when it should cool, or the reverse. It is a common fault here. |
Every job is different, and the best way to get a straight answer about your system is to call us directly. We will scope the work on the phone and give you a price before anything is scheduled. Call (743) 223-5935 any day from 5:30 AM to 9:00 PM.
(743) 223-5935